EEMENTOR ESP32 IoT Starter Kit: all components laid out below the storage box, from jumper wires to LCD and keypad

ESP32 IoT Starter Kit | Arduino IDE Compatible | Free Tutorials

$57.00
Skip to product information
EEMENTOR ESP32 IoT Starter Kit: all components laid out below the storage box, from jumper wires to LCD and keypad

ESP32 IoT Starter Kit | Arduino IDE Compatible | Free Tutorials

$57.00
Taxes included. Free shipping.
    • Complete IoT starter kit: Features ESP32 Controller Board, Keypad Module, 5V Relay, Breadboard, Servo Motor, DC Motor, and more for exciting IoT projects.
    • Compatible with Arduino IDE Software: Easily program and experiment with IoT applications using the ESP32 board.
    • Free Ebook included: Access tutorials and guides to kickstart your IoT projects.
    • Includes camera module: Capture images and video for enhanced IoT projects and applications.
    • Perfect for IoT enthusiasts: Explore the world of Internet of Things with confidence and creativity.

Learn with this kit

Learn ESP32, electronics and IoT by building real connected projects

What's in the ESP32 IoT Starter Kit

QtyComponent
1ESP32 controller board
1USB cable
1830 tie-point breadboard
22-channel relay module
1PIR motion sensor
140Jumper wires
1Servo motor
1RC522 RFID module (13.56 MHz) with S50 card
14-digit 7-segment display (common cathode)
1Joystick module
1DHT11 temperature and humidity sensor
1Passive buzzer
Show all 49 components
1Active buzzer
19 V battery
11602 LCD display
1ESP32 expansion board
14×4 keypad module
310 kΩ potentiometer
1RGB LED
1White LED
4Green LED
4Red LED
4Yellow LED
2Blue LED
1Ultrasonic sensor
51N4007 rectifier diode
1Male-to-male Dupont wire, 40 pin
1Female-to-female Dupont wire, 40 pin
13–6 V DC motor
140-pin male header
6PC817 phototransistor optocoupler
1Piezo buzzer
1Tilt switch
2TIP120 transistor
14N35 optocoupler
3Push button 6×6×5 mm
1TMP36 temperature sensor
3100 µF capacitor
1L293D motor driver
10Resistor 220 Ω
5Resistor 560 Ω
5Resistor 4.7 kΩ
10Resistor 10 kΩ
5Resistor 1 MΩ
5Resistor 10 MΩ
1IR remote control
1IR remote control module
1IR receiver
1OV2640 camera

Set up the ESP32 in Arduino IDE

Install the free Arduino IDE, open Tools → Board → Boards Manager and install esp32 by Espressif Systems. Then choose Tools → Board → esp32 → ESP32 Dev Module, pick the port and upload. The kit's ESP32-DevKitC V4 board works on Windows, macOS and Linux.

Step by step: set up the ESP32 in the Arduino IDE →

Board and core hardware

ESP32-DevKitC V4 with ESP32-WROOM-32: dual-core, built-in Wi-Fi and Bluetooth, 3.3 V logic

Who it's for

  • Beginners ready to learn electronics and IoT
  • Students aged 12+ (younger learners with an adult)
  • Makers starting with home automation and connected projects

IoT projects included

What you'll learn

  • Setting up the ESP32 in the Arduino IDE
  • Programming in Arduino C/C++
  • Digital outputs (GPIO): LEDs and resistors
  • Reading digital sensors and analog inputs (ADC)
  • Measuring temperature and humidity with the DHT11
  • Detecting motion with a PIR sensor
  • Connecting to Wi-Fi and running a web server
  • Switching a separate circuit safely with a relay

Free lessons

Learn with this kit

See all lessons

Product details

Introducing the IoT Starter Kit

Introducing the IoT Starter Kit – your gateway to the exciting world of Internet of Things (IoT) projects. This comprehensive kit includes everything you need to start building and experimenting with IoT applications. It features the versatile ESP32 Controller Board, a range of modules and sensors, and even a camera module for capturing images and videos. Compatible with Arduino IDE software, the IoT Starter Kit comes with a free eBook on a USB drive. This eBook is packed with tutorials and guides to help you get started on your IoT journey. Whether you’re a beginner or an experienced enthusiast, this kit is designed to inspire creativity and innovation in IoT projects. With high-quality components and a user-friendly design, the IoT Starter Kit offers endless possibilities for creating smart devices, home automation systems, and much more. Explore the power of IoT technology and bring your ideas to life with the IoT Starter Kit.

All these components come neatly organized in an 8-grid plastic component storage box, ensuring you have everything you need to dive into your IoT projects.

Comprehensive eBook Included with the EEmentor IoT ESP32 Starter Kit

The EEmentor IoT ESP32 Starter Kit includes a comprehensive eBook, packed with detailed tutorials and guides to help you maximize your learning experience. Whether you’re a beginner or an experienced enthusiast, this eBook supports you every step of the way. It covers a wide range of topics, from basic circuit design and programming with Arduino IDE to advanced projects utilizing the various sensors and components included in the kit.

Each tutorial is crafted with clear, step-by-step instructions, complete with wiring diagrams, code examples, and troubleshooting tips. With this eBook, you’ll gain the knowledge and confidence to bring your creative projects to life. The eBook is conveniently provided on a USB drive, making it easy to access and reference anytime, anywhere. Dive into the world of electronics with the EEmentor IoT ESP32 Starter Kit and its invaluable eBook, your gateway to endless possibilities

Frequently asked questions

Do I need coding experience?

No. The learning path starts with installing the Arduino IDE and blinking an LED, and every lesson includes the complete code with an explanation.

Which board do I pick in Arduino IDE for the ESP32?

Install esp32 by Espressif Systems in the Boards Manager, then choose Tools → Board → esp32 → ESP32 Dev Module and the port your board is on. Our lesson Set up the ESP32 in the Arduino IDE shows every step.

Can I program the ESP32 with the Arduino IDE?

Yes. With the free ESP32 board package you write Arduino C/C++ in the Arduino IDE on Windows, macOS or Linux, just like on an Arduino board.

Do I need Wi-Fi for the IoT projects?

The Wi-Fi projects need a 2.4 GHz Wi-Fi network, because the ESP32 does not connect to 5 GHz networks. Many lessons work without Wi-Fi, and some let the ESP32 make its own network for your phone.

Are the lessons free?

Yes. 120+ lessons and projects with wiring diagrams and code are free in our Learning & Projects Hub, and the kit also comes with an ebook on a USB drive.

Can I control mains-powered devices with the relay?

Our lessons only switch low-voltage circuits. Never connect mains electricity to the relay without proper training and an enclosure.

You may also like

Learning & Projects Hub

Learn it. Build it. Share it.

Every kit comes with free step-by-step lessons. Follow a learning path, build along with our team, then share your own creation with the community.

  • Learning paths8Step-by-step tracks from your first circuit to a finished project.
  • Lessons200+Free tutorials for every kit, with code and wiring diagrams.
  • Community projects14Real builds from makers like you. Get inspired, then share yours.