ESP32 IoT Starter Kit | Arduino IDE Compatible | Free Tutorials
Sale price
$57.00
Regular price
$93.00
Skip to product information
ESP32 IoT Starter Kit | Arduino IDE Compatible | Free Tutorials
Sale price
$57.00
Regular price
$93.00
Taxes included.
Shipping calculated at checkout.
-
- Complete IoT starter kit: Features ESP32 Controller Board, Keypad Module, 5V Relay, Breadboard, Servo Motor, DC Motor, and more for exciting IoT projects.
- Compatible with Arduino IDE Software: Easily program and experiment with IoT applications using the ESP32 board.
- Free Ebook included: Access tutorials and guides to kickstart your IoT projects.
- Includes camera module: Capture images and video for enhanced IoT projects and applications.
- Perfect for IoT enthusiasts: Explore the world of Internet of Things with confidence and creativity.
Complete your setup
45-in-1 Sensor Kit | Compatible with Arduino IDE and ESP32
Regular price
$58.00
Sale price
$37.00
Learn with this kit
Learn ESP32, electronics and IoT by building real connected projects
What's inside
- ESP32-DevKitC V4 boardWi-Fi and Bluetooth
- ESP32 expansion board
- OV2640 camera for ESP32
- USB cablefor programming and power
- 830-point breadboard
- 140 jumper wiresplus 40-pin male-male and female-female Dupont wires
- 40-pin male header
- 9 V battery
- 2 × 2-channel relay module
- Servo motor
- 3–6 V DC motor
- L293D motor driver
- 2 × TIP120 transistor
- Ultrasonic sensor
- PIR motion sensor
- DHT11 moduletemperature and humidity
- TMP36 temperature sensor
- Tilt switch
- RC522 RFID module13.56 MHz, with S50 card
- IR remote controlwith IR receiver module and IR receiver
- Joystick module
- 4×4 keypad module
- 1602 LCD display
- 4-digit 7-segment displaycommon cathode
- Buzzersactive, passive and piezo
- LEDs4 red, 4 yellow, 4 green, 2 blue, 1 white, 1 RGB
- 3 × push button6×6×5 mm
- 3 × 10 kΩ potentiometer
- Resistors10 × 220 Ω, 10 × 10 kΩ, 5 each of 560 Ω, 4.7 kΩ, 1 MΩ and 10 MΩ
- Optocouplers6 × PC817 and 1 × 4N35
- 5 × 1N4007 diode
- 3 × 100 µF capacitor
- Ebookon a USB drive
Board and core hardware
ESP32-DevKitC V4 with ESP32-WROOM-32: dual-core, built-in Wi-Fi and Bluetooth, 3.3 V logic
Software
Arduino IDE with the free ESP32 board package (Windows, macOS, Linux)
Who it's for
- Beginners ready to learn electronics and IoT
- Students aged 12+ (younger learners with an adult)
- Makers starting with home automation and connected projects
What you'll learn
- Setting up the ESP32 in the Arduino IDE
- Programming in Arduino C/C++
- Digital outputs (GPIO): LEDs and resistors
- Reading digital sensors and analog inputs (ADC)
- Measuring temperature and humidity with the DHT11
- Detecting motion with a PIR sensor
- Connecting to Wi-Fi and running a web server
- Switching a separate circuit safely with a relay
Your learning path
Product details
Introducing the IoT Starter Kit
Introducing the IoT Starter Kit – your gateway to the exciting world of Internet of Things (IoT) projects. This comprehensive kit includes everything you need to start building and experimenting with IoT applications. It features the versatile ESP32 Controller Board, a range of modules and sensors, and even a camera module for capturing images and videos. Compatible with Arduino IDE software, the IoT Starter Kit comes with a free eBook on a USB drive. This eBook is packed with tutorials and guides to help you get started on your IoT journey. Whether you’re a beginner or an experienced enthusiast, this kit is designed to inspire creativity and innovation in IoT projects. With high-quality components and a user-friendly design, the IoT Starter Kit offers endless possibilities for creating smart devices, home automation systems, and much more. Explore the power of IoT technology and bring your ideas to life with the IoT Starter Kit.Components of the EEmentor IoT ESP32 Kit
The EEmentor IoT ESP32 Kit includes:
- ESP32 controller board
- USB cable
- 830 tie-point breadboard
- 2 × 2-channel relay module
- PIR motion sensor
- 140 × Jumper wires
- Servo motor
- RC522 RFID module (13.56 MHz) with S50 card
- 4-digit 7-segment display (common cathode)
- Joystick module
- DHT11 temperature and humidity sensor
- Passive buzzer
- Active buzzer
- 9 V battery
- 1602 LCD display
- ESP32 expansion board
- 4×4 keypad module
- 3 × 10 kΩ potentiometer
- RGB LED
- White LED
- 4 × Green LED
- 4 × Red LED
- 4 × Yellow LED
- 2 × Blue LED
- Ultrasonic sensor
- 5 × 1N4007 rectifier diode
- Male-to-male Dupont wire, 40 pin
- Female-to-female Dupont wire, 40 pin
- 3–6 V DC motor
- 40-pin male header
- 6 × PC817 phototransistor optocoupler
- Piezo buzzer
- Tilt switch
- 2 × TIP120 transistor
- 4N35 optocoupler
- 3 × Push button 6×6×5 mm
- TMP36 temperature sensor
- 3 × 100 µF capacitor
- L293D motor driver
- 10 × Resistor 220 Ω
- 5 × Resistor 560 Ω
- 5 × Resistor 4.7 kΩ
- 10 × Resistor 10 kΩ
- 5 × Resistor 1 MΩ
- 5 × Resistor 10 MΩ
- IR remote control
- IR remote control module
- IR receiver
- OV2640 camera
All these components come neatly organized in an 8-grid plastic component storage box, ensuring you have everything you need to dive into your IoT projects.
Comprehensive eBook Included with the EEmentor IoT ESP32 Starter Kit
The EEmentor IoT ESP32 Starter Kit includes a comprehensive eBook, packed with detailed tutorials and guides to help you maximize your learning experience. Whether you’re a beginner or an experienced enthusiast, this eBook supports you every step of the way. It covers a wide range of topics, from basic circuit design and programming with Arduino IDE to advanced projects utilizing the various sensors and components included in the kit.
Each tutorial is crafted with clear, step-by-step instructions, complete with wiring diagrams, code examples, and troubleshooting tips. With this eBook, you’ll gain the knowledge and confidence to bring your creative projects to life. The eBook is conveniently provided on a USB drive, making it easy to access and reference anytime, anywhere. Dive into the world of electronics with the EEmentor IoT ESP32 Starter Kit and its invaluable eBook, your gateway to endless possibilities
Frequently asked questions
Do I need programming experience?
No. The learning path starts with installing the Arduino IDE and blinking an LED, and every lesson includes the complete code with an explanation.
What computer do I need?
Any Windows, macOS or Linux computer that can run the free Arduino IDE, with a free USB port. A USB cable is included.
Are the lessons free?
Yes. All lessons, wiring diagrams and code are free in our Learning & Projects Hub, and the kit also comes with an ebook on a USB drive.
Can I control mains-powered devices with the relay?
Our lessons only switch low-voltage circuits. Never connect mains electricity to the relay without proper training and an enclosure.
How much is shipping, and can I return the kit?
Shipping is charged once per order based on the order total, and orders of $350 or more ship free. See our Shipping Policy. You can return the kit within 14 days of delivery, see our Refund Policy.
I'm stuck. Can I get help?
Email us at contact@eementor.co with the lesson name and a photo of your wiring, and we'll help you find the problem.
You may also like
Learning & Projects Hub
Learn it. Build it. Share it.
Every kit comes with free step-by-step lessons. Follow a learning path, build along with our team, then share your own creation with the community.
- Learning paths6Step-by-step tracks from your first circuit to a finished project.
- Lessons201Free tutorials for every kit, with code and wiring diagrams.
- Community projects19Real builds from makers like you. Get inspired, then share yours.