Learning path · Advanced
Raspberry Pi advanced projects
Ten bigger builds for the Raspberry Pi 4 and the Raspberry Pi Pico: a climate logger with a live web chart, an RFID door with an attendance log, an ultrasonic radar, a keypad alarm with phone alerts, and the Pico as a sensor hub and data logger.
- 10 lessons
- about 16 h
About this path
You finished the Raspberry Pi starter path, so you can wire LEDs and buttons and write Python with gpiozero. This path turns those skills into real projects that run on their own: programs that start when the Pi boots, save their readings in a database, serve live web pages to your phone and send you alerts.
Along the way you use the Pi's SPI and I2C buses to talk to an RFID reader and a motion sensor, decode an IR remote with the Linux kernel, drive an LCD and a 4×4 keypad, and stream data to the browser while it happens.
The last three projects add the Raspberry Pi Pico, a small microcontroller you program in MicroPython. It has the analog inputs the Pi lacks, keeps perfect time with interrupts, and logs data even when the power goes off, then hands everything to the Pi over USB.
You need a Raspberry Pi 4 Model B with its power supply and microSD card, a Raspberry Pi Pico for the last three projects, and the parts from the EEMENTOR IoT ESP32 Starter Kit and the 45-in-1 Sensor Kit. Each project takes 60 to 120 minutes and comes with a wiring diagram, the complete code and an explanation of how it works.
Kits you need
-
Used in 9 of 10 lessons
-
Used in 8 of 10 lessons
-
Used in 3 of 10 lessons
-
Used in 3 of 10 lessons
Lessons in this path
Lessons 1–10
Advanced
Bigger builds that bring everything you've learned together.
- 10 lessons
- 16 hours
-
Lesson 1
-
Lesson 2
-
Lesson 3
-
Lesson 4
-
Lesson 5
-
Lesson 6
-
Lesson 7
-
Lesson 8
-
Lesson 9
-
Lesson 10