{"product_id":"qidi-plus5-3d-printer","title":"QIDI Plus 5 3D Printer | Large Enclosed Printer for Schools | 320×320×300 mm Print Size","description":"\u003cp\u003e\u003cstrong\u003eBig prints and full class sets, without the hassle.\u003c\/strong\u003e The QIDI Plus 5 gives you a 320 × 320 × 300 mm print area in an enclosed, filtered printer. It's ideal for schools and makerspaces that want to print parts for a whole class in one go.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18% more print space in the same footprint:\u003c\/strong\u003e 320 × 320 × 300 mm fits large single-piece models or a full plate of lesson parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3rd-gen 65 °C heated chamber:\u003c\/strong\u003e ABS, ASA, nylon and PC print without warping or splitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHands-free and watched:\u003c\/strong\u003e nozzle-contact auto levelling, 1080p AI camera, filament run-out sensor and power-loss recovery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner air for shared rooms:\u003c\/strong\u003e 3-in-1 filter (G3 pre-filter, H12 HEPA, coconut-shell activated carbon).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch4\u003ePrint a whole class set at once\u003c\/h4\u003e\u003cp\u003eThe large bed holds many small parts at the same time. With \u003cstrong\u003eSmart Skip Objects\u003c\/strong\u003e, if one part on the plate fails you skip just that part and the rest keeps printing.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-smart-skip-objects.png?v=1792181219\u0026amp;width=1400\" alt=\"QIDI Plus 5 Smart Skip Objects\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\u003ch4\u003ePrecision motion system\u003c\/h4\u003e\u003cp\u003eX-axis linear rails and wide 9 mm 1.5GT CoreXY belts (the usual size is 6 mm) give smooth, accurate and quiet high-speed printing.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-linear-rails-belt.png?v=1792181218\u0026amp;width=1400\" alt=\"QIDI Plus 5 linear guide rails and 1.5GT belt\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\u003ch4\u003eNext-gen high-flow hotend\u003c\/h4\u003e\u003cp\u003eA ceramic heater reaches 220 °C from cold in about 40 seconds and goes up to 370 °C for engineering filaments.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-high-flow-hotend.png?v=1792181219\u0026amp;width=1400\" alt=\"QIDI Plus 5 next-gen high-flow hotend\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\u003ch4\u003ePrint from your phone\u003c\/h4\u003e\u003cp\u003eBrowse ready-made models in the QIDI Maker app and send them to the printer with a tap. Or use QIDI Studio on your computer for your own designs.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-qidi-maker-app.png?v=1792181219\u0026amp;width=1400\" alt=\"QIDI Maker app for printing from your phone\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch4\u003e3rd-gen 65 °C chamber heating\u003c\/h4\u003e\u003cp\u003eA powerful chamber heater warms the whole enclosure evenly, so ABS, ASA, nylon and PC layers bond strongly without warping or splitting.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-chamber-heating.png?v=1792181219\u0026amp;width=1400\" alt=\"QIDI Plus 5 3rd-gen 65 °C chamber heating\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\u003ch4\u003eNext-gen auto levelling\u003c\/h4\u003e\u003cp\u003eA load-cell sensor in the hotend measures the bed by touching it with the nozzle. First layers come out right every time, with nothing to adjust.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-auto-levelling.png?v=1792181219\u0026amp;width=1400\" alt=\"QIDI Plus 5 next-gen auto levelling\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\u003ch4\u003eCleaner air in shared rooms\u003c\/h4\u003e\u003cp\u003eAir circulates through a 3-layer filter cartridge: G3 pre-filter, H12 HEPA and coconut-shell activated carbon. That makes it a good fit for classrooms and offices.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-air-filter.png?v=1792181218\u0026amp;width=1400\" alt=\"QIDI Plus 5 3-layer air filter\" loading=\"lazy\" style=\"width:100%;max-width:440px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\u003ch3\u003eMade for the EEMENTOR lessons\u003c\/h3\u003e\n\u003cp\u003eEvery printed part in our lessons fits, from the sunflower and anemometer to the rain-gauge funnel (104 × 108 × 124 mm, our largest part). Download a lesson's STL file, slice it in QIDI Studio and send it to the printer over Wi-Fi or on a USB stick.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-build-volume.png?v=1792181219\u0026amp;width=1400\" alt=\"QIDI Plus 5 print size 320 × 320 × 300 mm\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePrinter only or Combo?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eCombo\u003c\/strong\u003e includes the \u003cstrong\u003eQIDI BOX\u003c\/strong\u003e: a 4-slot unit that switches filament colours automatically, dries filament while you print (up to 65 °C) and warns you about tangles or an empty spool. Choose the Combo if you want multi-colour prints or need to keep PETG and nylon dry. You can also add a QIDI BOX later.\u003c\/p\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-qidi-box-16-colour.png?v=1792181218\u0026amp;width=1400\" alt=\"QIDI BOX: up to 16-colour printing\" loading=\"lazy\" style=\"width:100%;max-width:440px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich QIDI printer is right for you?\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePrint size\u003c\/th\u003e\n\u003cth\u003eHeated chamber\u003c\/th\u003e\n\u003cth\u003eAI camera \u0026amp; HEPA filter\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQ2C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e270 × 270 × 256 mm\u003c\/td\u003e\n\u003ctd\u003eNot heated\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003ctd\u003eFirst printer at home; PLA and PETG lesson parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQ2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e270 × 270 × 256 mm\u003c\/td\u003e\n\u003ctd\u003e65 °C\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eFamilies and classrooms; safest all-rounder; ABS and nylon too\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePlus 5\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e320 × 320 × 300 mm\u003c\/td\u003e\n\u003ctd\u003e65 °C\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eSchools and makerspaces; bigger parts or a full plate of class sets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax 4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e390 × 390 × 340 mm\u003c\/td\u003e\n\u003ctd\u003e65 °C\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003ctd\u003eLabs and serious makers; largest prints, fastest speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eAll four are fully enclosed, print PLA and PETG for every EEMENTOR lesson, and work with the QIDI BOX for multi-colour printing.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\u003cp style=\"text-align:center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-plus5-whats-in-the-box.png?v=1792181218\u0026amp;width=1400\" alt=\"What's in the box: QIDI Plus 5 contents\" loading=\"lazy\" style=\"width:100%;max-width:820px;height:auto;border-radius:8px;\"\u003e\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrint size (build volume)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e320 × 320 × 300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStructure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoreXY, steel chassis, linear rail X axis, 9 mm belts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax speed \/ acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s \/ 20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHotend\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCeramic heater, bimetal nozzle, up to 370 °C (30 → 220 °C in 40 s)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm (0.2 \/ 0.6 \/ 0.8 mm optional)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeated bed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 120 °C, double-sided PEI magnetic plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActive heating up to 65 °C; 3-in-1 air filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLoad-cell auto levelling, filament run-out, power-loss recovery, input shaping, AI camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75 mm: PLA, PETG, ABS, ASA, TPU, PA, PC, PPS-CF, carbon\/glass-fibre blends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eScreen \/ storage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4\" touchscreen \/ 32 GB eMMC + USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi (2.4 \/ 5 GHz), Ethernet, USB, QIDI app and cloud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter size \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 × 488 × 558 mm \/ 29 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220–240 V AC, 50\/60 Hz (EU version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch4\u003eHow much space does the printer need?\u003c\/h4\u003e\u003cp\u003eThe Plus 5 measures 500 × 488 × 558 mm on the outside (shipping box 620 × 630 × 700 mm). Leave some extra room at the back, sides and top so you can change filament easily and the printer stays well ventilated.\u003c\/p\u003e\u003ch4\u003eCan it print in more than one colour?\u003c\/h4\u003e\u003cp\u003eYes, with the QIDI BOX multi-colour unit (included in the Combo). One BOX gives 4 colours; up to four BOXes can be chained for 16 colours or materials.\u003c\/p\u003e\u003ch4\u003eWhich software do I use?\u003c\/h4\u003e\u003cp\u003eQIDI Studio (free) gives the best results with ready-made profiles. The printer runs Klipper firmware, so OrcaSlicer and PrusaSlicer also work. It accepts STL, OBJ, 3MF and STEP files.\u003c\/p\u003e\u003ch4\u003eHow do I connect it?\u003c\/h4\u003e\u003cp\u003eOver Wi-Fi (2.4 or 5 GHz), Ethernet cable, or QIDI Cloud for remote monitoring. You can also print fully offline from a USB stick.\u003c\/p\u003e\u003ch4\u003eCan it print flexible filament (TPU)?\u003c\/h4\u003e\u003cp\u003eYes. TPU with a hardness of 95A is recommended; very soft filaments (below 85A) may print less cleanly. QIDI's wiki has a step-by-step TPU guide.\u003c\/p\u003e\u003ch4\u003eDo I need the Polar Cooler?\u003c\/h4\u003e\u003cp\u003eNot for PLA and PETG. The Polar Cooler helps on long prints with a hot chamber (ABS, nylon). Even with it, keep the chamber below about 45 °C when printing PLA.\u003c\/p\u003e\n\u003ch3\u003eMore information\u003c\/h3\u003e\n\u003cp\u003eYou can also refer to \u003ca href=\"https:\/\/eu.qidi3d.com\/products\/plus5\" target=\"_blank\" rel=\"noopener\"\u003eQIDI's official website\u003c\/a\u003e for product information and additional resources, such as manuals, guides and software.\u003c\/p\u003e\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eShips from QIDI's EU warehouse: \u003cstrong\u003e2–5 business days\u003c\/strong\u003e within the EU, \u003cstrong\u003e7–14 business days\u003c\/strong\u003e to other countries. If you order it together with kits, they arrive in separate parcels.\u003c\/p\u003e\u003cp\u003eOutside the EU we ship the model for your country's mains voltage. Contact \u003ca href=\"mailto:shop@eementor.co\"\u003eshop@eementor.co\u003c\/a\u003e if you're unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFor use with adult supervision. The nozzle and bed get very hot during printing.\u003c\/em\u003e\u003c\/p\u003e","brand":"QIDI","offers":[{"title":"Plus 5 (printer only)","offer_id":67794722816237,"sku":"QIDI-PLUS5","price":840.0,"currency_code":"USD","in_stock":true},{"title":"Plus 5 Combo (with QIDI BOX)","offer_id":67794722849005,"sku":"QIDI-PLUS5-COMBO","price":1008.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/2329\/6749\/files\/qidi-Plus5-main-image1_1798aa25-d69b-468d-9a1f-0824c7db206c.png?v=1792147961","url":"https:\/\/stem.eementor.co\/products\/qidi-plus5-3d-printer","provider":"EEMENTOR STEM™","version":"1.0","type":"link"}